lmtpminfo

The lmtpminfo utility returns the status of the TPM (Trusted Platform Module).

As a prerequisite to obtaining and using the TPM hostid, a TPM version 2.0 device must be available and enabled. In addition, the FlexNet Licensing Service must be installed. Contact your software publisher for information on how to install the FlexNet Licensing Service.

Note:The lmtpminfo utility is only available for Windows platforms.

Usage

lmtpminfo [-long]

Where -long returns more detailed TPM information.

The following TPM information is available:

TPM information from lmtpminfo

Output

Description

Trusted Platform Module (TPM) detected.

TPM 2.0 is available. A list of relevant TPM details is displayed.

Trusted Platform Module (TPM) status cannot be determined.

ERROR: Could not obtain Trusted Platform Module (TPM) information.

ERROR CODE: -213. The FlexNet Licensing Service is not installed.

TPM 2.0 could not be detected. The FlexNet Licensing Service must be installed to obtain the TPM hostid.

Trusted Platform Module (TPM) status cannot be determined.

ERROR: Could not obtain Trusted Platform Module (TPM) information.

ERROR CODE: -214. The FlexNet Licensing Service version is not as expected.

TPM 2.0 could not be detected. Install the latest version of the FlexNet Licensing Service.

Trusted Platform Module (TPM) status cannot be determined.

ERROR: Could not obtain Trusted Platform Module (TPM) information.

ERROR CODE: -223. FlexNet Licensing Service requires new install.

TPM 2.0 could not be detected. Reinstall the latest version of the FlexNet Licensing Service.

Trusted Platform Module (TPM) status cannot be determined.

ERROR: Could not obtain Trusted Platform Module (TPM) information.

ERROR CODE: -227. TPM version is not supported.

The TPM status cannot be obtained.

Possible reason:
An unsupported TPM version was found. (Only TPM 2.0 is supported.)

Trusted Platform Module (TPM) status cannot be determined.

ERROR: Could not obtain Trusted Platform Module (TPM) information.

ERROR CODE: -229. TPM properties are not available.

The TPM status cannot be obtained.

Possible reason:
TPM 2.0 is available, but the TPM is currently disabled or turned off in the BIOS.

To use the TPM, it must be turned on and enabled in the machine’s BIOS (Security settings).